Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

rhino:engravingfonts [2015/09/14]
127.0.0.1 external edit
rhino:engravingfonts [2016/03/04] (current)
sandy
Line 3: Line 3:
 Is there a single stroke font you recommend when working with Rhino and RhinoCam? Is there a single stroke font you recommend when working with Rhino and RhinoCam?
  
-Yes. Dowload ​these [[http://​wiki.mcneel.com/​_media/​legacy/​en/​MecSoft_Font-1.zip|engraving fonts]]+Yes. Download ​these [[http://​wiki.mcneel.com/​_media/​legacy/​en/​MecSoft_Font-1.zip|engraving fonts.]]
  
-  * 1. Download and unzip the attached font file to a temporary folder on your computer. +  * Download and unzip the attached font file to a temporary folder on your computer. 
-  * 2. Copy **MecSoft_Font-1.ttf** to **C:​\Windows\Fonts.** The font will now be installed on your computer. +  * Copy **MecSoft_Font-1.ttf** to //C:​\Windows\Fonts.// The font will now be installed on your computer. 
-  * 3. Open Rhino 4.0 +  * Open Rhino 4.0 
-  * 4. Select **TextObject** command +  * Select **TextObject** command. 
-  * 5. Make sure to select curves and allow single stroke font. +  * Make sure to select curves and allow single stroke font. 
-  * 6. Select **MecSoft_Font-1** from the list of fonts.+  * Select **MecSoft_Font-1** from the list of fonts.
  
  
  
rhino/engravingfonts.txt · Last modified: 2016/03/04 by sandy