McNeel Wiki

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
rhino:exporttolaser [2020/08/14]
127.0.0.1 external edit 		rhino:exporttolaser [2025/01/29] (current)
noemi
Line 57: Line 57:
 =====Laser cutting of fabric===== =====Laser cutting of fabric=====
  
-> **Comment:** //Laser cutting work wells for cutting patterns into a **fabric materials** that will be used as a tablecloth. Check out this site for a better idea of what can be done: http://www.synrad.com/search_apps/materials/Plastics.htm . It's simple enough to do a sample, so once you find someone local take a series of sample materials. Note: Typically this would be done with a low power laser under 100 watts (30 would probably do it). With this sort of power range be sure there is no metallic materials in the material because it won't be able to cut the metal element. One other thing to note: With the right setting you'll do better with a polyester type material rather than a cotton as the laser will cut the polyester and seal the edge at the same time. [Ken Miller - 2005-11-10]//+> **Comment:** //Laser cutting works well for cutting patterns into a **fabric materials** that will be used as a tablecloth. Check out this site for a better idea of what can be done: http://www.synrad.com/search_apps/materials/Plastics.htm . It's simple enough to do a sample, so once you find someone local take a series of sample materials. Note: Typically this would be done with a low power laser under 100 watts (30 would probably do it). With this sort of power range be sure there are no metallic materials in the material because it won't be able to cut the metal element. One other thing to note: With the right setting you'll do better with a polyester type material rather than a cotton as the laser will cut the polyester and seal the edge at the same time. [Ken Miller - 2005-11-10]//
  
 > **Comment:** //With the new V4 print modes laser cutting directly, Rhino works wonderfully. No converting to line, polyline, and arcs . Snappier too.// > **Comment:** //With the new V4 print modes laser cutting directly, Rhino works wonderfully. No converting to line, polyline, and arcs . Snappier too.//
rhino/exporttolaser.1597445311.txt.gz ยท Last modified: 2020/08/14 by 127.0.0.1

Page Tools

© 1997-2025 McNeel • North America • Europe • Latin America • Asia • Korea     Recent Changes RSS Feed Driven by DokuWiki