Rhino specialty hatches include these hatches:

• Concrete
• Reinforced Concrete
• Earth
• Herringbone
• Granite
• Sand

Rhino can import hatches that are written in the CAD standard PAT format.

• Download this open source, free to use Rhino hatch file
• Or you can import your CAD .PAT if you have one.
• You can also download 3rd party hatches here.

1. Open your file in Rhino 6, 7, or 8.
2. On Windows, type the Options command or on Mac go to File and click Settings.
3. Click the Hatch page.
4. At the bottom of the Hatch page, pick the Import button.
5. Pick the Hatches to import from the dialog.
6. Pick OK

1. Type the Hatch command.
2. Pick the curve and Enter.
3. Pick the Hatch and set the appropriate scale in the dialog.
4. Pick OK

In Rhino 8 the section style is typically a assigned to the layer.

When using the by layer section style, objects that are on the layer and clipped by a clipping section or clipping plane, will be displayed in this style.

After adding a clipping section or clipping plane to the model, go to the layer panel. The Section Style is available under its own column.

See legacy Rhino hatch patterns options: https://wiki.mcneel.com/rhino/draftingpage https://wiki.mcneel.com/rhino/hatchpatterns